How To Use A Magnetic Drilling Machine

 If you work in the construction, heavy engineering or fabrication industry, then you will love using a magnetic drill. This is because they can be used for both on-site and off-site jobs.

Like any other drill, this is normally used for drilling holes, but it can also be used for repairs and construction on structural steel. A lot of the more modern models are built fairly light which makes on-site jobs much more efficient.

In this article, we will go over how to use a magnetic drill as well as some safety tips.

How It Actually Works

1. Place the drill on the work piece that needs to be drilled.

2. Connect the suitable core drill to the arbor via the ejector pin.

3. Align the drill with the hole.

4. Use the pilot pin and find the centre of the hole.

5. Plug and power the machine.

6. Use the gear if needed to control the speed of the drill.

7. Use the magnetic switch and drill motor consequently.

8. Use the lubrication tap for a smooth operation.

9. Apply downward force whilst you are drilling the whole.

10. Complete the cut with the help of an annular cutter and then turn the motor off.

11. Clean the workspace once you are finished.

How To Stay Safe Whilst Magnetic Drilling

Avoid Use In Flammable And Explosive Environments – The last thing you want is something catching on fire and burning your entire warehouse down or wherever you are working. The same thing applies within an explosive environment. Ensure you are prioritising your safety by analysing your environment prior to using the machine.

Use The Machine Under Professional Supervision – Unless you are fully trained, only use this machine under professional supervision and guidance by a responsible person. These industrial machines are not to be messed around with, and should only be used when needed.

Make Sure To Check Pre-emptively – Statuary checks before you operate the machine will never harm you. They will take a few extra minutes, but nothing that will delay you massively. It’s better to stay safe, knowing that everything works as opposed to using a possibly faulty machine that could injure you.

Always Switch Off After Use – Once you are done using the machine, make sure to take the switch off and unplug it from the wall. If this machine were to suddenly turn on unexpectedly, you could be exposed to some serious lifelong injuries.

Store The Machine Away Appropriately – Make the machine is kept in a clean and dry environment. Also, make sure it is out of the reach of children, as the sharp drill could cause an injury.

Now you should feel confident in using a magnetic drill.

We are a magnetic drill supplier in the UK and offer premium products at a competitive price.

If you would like to find out more about our magnetic drill products, then head over to www.toolfrance.com or give us a call on 02476 619267.